Economic Lead Free Hot Air Reflow Oven A8 Up 8 Hot Air Bottom 8 Hot Air Heating Zone PC Control
- JAGUAR's A8 Lead-free Hot Air Reflow Oven, is one of JAGUAR Economic Series, also is a Basic model of Reflow Oven.
- Compact machine size can meet some customer's compact plant space.
- Independent up and bottom heating for Pre-heating Zone, Soldering Zone and Cooling Zone
- Independent recycle, Independent temp. control, Independent cooling zone
- Modular design, convenient to maintenance
Introduction:
No.1 The unique advanced long life heating system
1. The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The
peak wave length of the radiation power is 4UM with curved surface reflector increasing temperature ramp up speed, improve the thermal efficiency. The special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect" completely.
2. Using special high temperature barrier structure for heat preservation and special iron in
Heating passage.
3. Using imported Taiwan SanYue long shaft high temperature blower motor and W shaped heat duct, no noise & vibration, convenient for maintenance.
4. Heating zones with porous aluminum plate directing the hot air to guarantee the heat evenly distributed to the PCB. Hood can open completely so that convenient for cleanup.
No.2 Smooth and reliable transmission system
1. The conveyor system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running smooth, speed varies in 0-1000mm/min.
2. Independent roller structure support and match stainless steel mesh belt to make the running smoothly and the speed precision is up to ±20 mm/min.
3.Special stainless steel mesh belt: durable and wear-resistant, long lifetime.
No.3 Stable and reliable electrical control system
1. It adopts imported thermostat control which owns fuzzy logic and PID close loop system. It can fast response to temperature changes and ensure temperature compensation by PID intelligent operation.
2. Using thermocouple imported from Taiwan to each temperature zone, it can fast and sensitive response the changes in each temperature zone, feedback and control timely, compensate the temperature stability in each zone.
3. Special SSR solid state relay matched with dedicated heat dissipating block improve the heat efficiency greatly and prolong the lifetime effectively. Non-contact output and fuzzy control function by thermostat, can monitor the changes of environmental temperature, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control & the uniform internal temperature. The length ,direction, temperature distribution, all these meet with IPC standards .
4. Heat energy is abundant, heat up fast, it’s only need 20 minutes from room temperature to set-point temperature.
5. Failure diagnosis, visual & audio alarm.
6. Delay shutdown production function, uniform cooling after the shutdown: prevent hardwares thermal damaged.
| Model | Jaguar A8 |
| Heating System |
| Number of heating zones | Top 8/Bottom8 |
| Heating passage | 2800MM |
| Heating style | Top: Hot Air; bottom: Hot Air |
| Cooling style | Force air |
| Conveyor System |
| Max. Width of PCB | 350mm |
| Mesh belt width | 400mm |
| Conveyor Direction | L→R(or R→L) |
| Process Height | 900±20mm |
| Conveyor type | Mesh |
| Conveyor speed | 0-1000mm/min |
| Fixed track | Front track fixed(option: rear track fixed) |
| Control System |
| Power supply | 5 line 3 phase 380V 50/60Hz |
| Total power consumption | |
| Startup power consumption | 22kw |
| Steady consumption | 4-7KW |
| Ramp Up time | About 25 mins |
| Temp. setpoint | Room temperature-300℃ |
| Temp. control method | PC |
| Temp. control precision | ±2℃ |
| Temp. deviation on PCB | ±2℃ |
| Data storage | Process Data and Status Storage(80GB) |
| Nozzle plate | Aluminum Alloy Plate |
| Abnormal Alarm | Abnormal temp. (overtemp/low temp.) |
| Board dropped alarm | Tower light: Amber-warning, Green-normal, Red-abnormal |
| General |
| Dimension(L*W*H) | 4200×800×1320mm |
| Weight | 800KG |
| Color | Computer grey |
Advantages
The Unique Advanced Long Life Heating System
1. The heating system adopt the Swedish nickel heater with efficiency and energy-saving.
2. The peak wave length of the radiation power is 4UM with curved surface reflector increasing temperature ramp up speed, improve the thermal efficiency.
3. The special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect" completely
4. Using special high temperature barrier structure for heat preservation and special iron in heating passage.
5. Using imported Taiwan SanYue long shaft high temperature blower motor and W shaped heat duct, no noise & vibration, convenient for maintenance.
6. Heating zones with porous aluminum plate directing the hot air to guarantee the heat evenly distributed to the PCB. Hood can open completely so that convenient for cleanup.
Product Tags:
|
|
PCB Assembly Forced Hot Air Reflow Oven , Soldering Oven Smd Welding Machine Images
|
